ผลิตภัณฑ์
433Mhz RF Transmitter / Receiver
ชื่อสินค้า : 433 MHz RF Wireless Transmitter / Receiver Moudle โมดูล รับ ส่ง สัญญาณไร้สาย 1 ชุด *** 1 คำสั่งซื้อประกอบ ด้วย ตัวรับ และ ตัวส่ง *** 1 order includes receiver and transmitter. รายละเอียดสินค้าฝั่งส่ง : - แรงดันขาเข้า : DC 3V - 12V กำลังสูงสุดอยู่ที่ 12V - กระแสสัญาณ 40mA และต่ำสุดที่ 9mA - ความถี่ 433 MHz - Power 25mW - ความเร็วการส่ง 10Kbps รายละเอียดสินค้าฝั่งรับ : - แรงดันขาเข้า : DC 5V - กระแสสัญาณ 5.5mA - ใช้ความถี่ย่าน 433 MHz Shipping side product details: - Input voltage: DC 3V - 12V, maximum power is 12V. - Signal current 40mA and minimum 9mA - Frequency 433 MHz -Power 25mW - Transmission speed 10Kbps Product details on the receiving side: - Input voltage : DC 5V - Signal current 5.5mA - Uses a frequency of 433 MHz.
DC - DC USB Power Module
ชื่อสินค้า : DC - DC USB Power Module บอร์ด แปลงไฟ ยูเอส บี พร้อมจอแสดงผล LED 5v เป็น 1.2 - 24v Buck Boost Step UP Down รายละเอียดสินค้า แรงดันไฟฟ้าเข้า: 3.5-12V แรงดันไฟฟ้าออก: 1.2-24V แรงดันไฟฟ้าออก: 1.2V~2V ใช้งานไม่เกิน 2W แรงดันไฟฟ้าออก: 2V~20V, ใช้งานไม่เกิน 3W แรงดันไฟฟ้าออก: 20V~24V, ใช้งานไม่เกิน 2.5W ขนาด: ความยาว 64*ความกว้าง 22 มิลลิเมตร (ไม่รวมปลั๊ก USB) Product Specification Input voltage: 3.5-12V Output voltage: 1.2-24V Output voltage: 1.2V~2V used within 2W Output voltage: 2V~20V, use within 3W Output voltage: 20V~24V, use within 2.5W Size: 64x22mm lengthwidth (excluding USB plug)
EZ-USB FX2LP CY7C68013A
ชื่อสินค้า : EZ-USB FX2LP CY7C68013A USB Analyzer บอร์ด วิเคราะห์ การทำงาน รายละเอียดสินค้า ชิปที่ใช้: ชิป CY7C68013A-56 ขนาดผลิตภัณฑ์: 55.5 มม. * 41.7 มม. น้ำหนักผลิตภัณฑ์: 9.7 กรัม ความถี่หลัก: ความถี่หลัก 48Mhz, มาตรฐานโปรโตคอลการส่งข้อมูลความเร็วสูง 480Mbps รายการจัดส่ง: บอร์ดหลัก CY7C68013A × 1 ชิ้น พื้นที่ข้อมูลโปรแกรม: 16KB Product Specification Using chip: CY7C68013A-56 chip Product Size: 55.5mm*41.7mm Product weight: 9.7g Main frequency: Main frequency 48Mhz, 480Mbps high-speed transmission protocol standard Shipping list: CY7C68013A core board × 1 piece Program data area: 16KB
MEGA 2560 PRO
ชื่อสินค้า : MEGA2560 PRO บอร์ดไมโครคอนโทรเลอร์ บอร์ดควบคุม ชิพ CH340G/ATMEGA2560-16AU Chip รายละเอียดสินค้า ไมโครคอนโทรลเลอร์: ATmega2560 ตัวแปลง Serial เป็น USB: CH340 แรงดันการทำงาน: 5V แรงดันไฟฟ้าที่แนะนำให้ใช้ (แรงดันไฟเข้า): 7-12V ขา Digital I/O: 54 ขา ขา PWM I/O (ใช้ร่วมกับ Digital I/O): 15 ขา ขา Analog Input (สามารถใช้เป็น digital I/O): 16 ขา กระแสไฟต่อขา I/O: 20mA กระแสไฟฟ้าที่สามารถดึงออกจากขา 3.3V: 50mA หน่วยความจำ Flash: 256 KBytes SRAM: 8 KBytes EEPROM: 4 KBytes ความเร็วนาฬิกา: 16MHz LED ในตัว: ต่อกับขา digital I/O ขาที่ 13 สไตล์ขั้วต่อ USB: Micro-B Female ขนาดบอร์ด (PCB): 54 x 38mm (2.1 x 1.5″) Product Specification Microcontroller: ATmega2560 Serial to USB Converter: CH340 Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I/O Pins: 54 PWM I/O Pins (Shared with Digital I/O): 15 Analog Input Pins (can also be used as digital I/O): 16 DC Current per I/O Pin: 20mA DC Current which can be drawn from 3.3V Pin: 50mA Flash Memory: 256 KBytes SRAM: 8 KBytes EEPROM: 4 KBytes Clock Speed: 16MHz Built-in LED: Attached to digital I/O Pin 13 USB Connector Style: Micro-B Female Board Dimensions (PCB): 54 x 38mm (2.1 x 1.5″)
Arduino Multi Function Shield
ชื่อสินค้า : Arduino Multi-Functional Shield บอร์ดขยาย การเรียนรู้ หลากหลายฟังก์ชั่น รายละเอียดสินค้า ขนาด : 69 x 54 x 11 มม น้ำหนัก : 25 กรัม Product Specification Size: 69 x 54 x 11 mm Weight: 25 grams
PAM8406
ชื่อสินค้า : PAM8406 โมดูล บอร์ดขยายเสียง 5w x 2 ข้าง Dual channel Audio Amplifier Module Stereo รายละเอียดสินค้า ประเภทขาออก: Class-D หรือ Class-AB กำลังขับ: 5W @ 10% THD กับโหลด 2Ω และแหล่งจ่ายไฟ 5V (โหมด Class-D), 3W @ 10% THD กับโหลด 4Ω และแหล่งจ่ายไฟ 5V กระแสความเงียบ: ต่ำ THD+N: ต่ำที่ช่วงการขับเต็ม รบกวน: ระดับรบกวนต่ำสุด ประสิทธิภาพ: สูงสุด 90% ในโหมด Class-D เสียงป๊อป: ไม่มีเสียงป๊อปเมื่อเปิด/ปิด การป้องกัน: มีการป้องกันวงจรสั้นอย่างเต็มที่พร้อมการกู้คืนอัตโนมัติ, การปิดเครื่องเมื่อร้อนเกินไป ส่วนประกอบ: ต้องการส่วนประกอบภายนอกน้อย แพ็คเกจ: SOP-16L/SOP-16(EP) การใช้งาน: ทีวี LCD, ลำโพงมัลติมีเดีย, ระบบ AM/FM, DABs VDD ขั้นต่ำ (V): 2.5 VDD สูงสุด (V): 5.5 I Q (mA): 10 mA กำลัง/CH (W) @ THD=10%: 5 กำลัง/CH (W) @ THD=1%: 4 มอโนหรือสเตอริโอ: สเตอริโอ BTL: ใช่ Class-D หรือ AB: D+AB ประสิทธิภาพ (%): 90 % ปรับระดับเสียง/เกน Rin เกนสูงสุด: 142kΩ/RI dB SNR: 90 dB PSRR: 70 dB คุณลักษณะพิเศษ: สลับระหว่าง Class D หรือ AB Product Specification Here are the technical specifications for the PAM8406: Output Type: Class-D or Class-AB Output Power: 5W @ 10% THD with a 2Ω Load and 5V Power Supply (Class-D Mode), 3W @ 10% THD with a 4Ω Load and 5V Power Supply Quiescent Current: Low THD+N: Low at Full Output Range Noise: Superior Low Noise Efficiency: Up to 90% in Class-D Mode Pop Noise: No Pop At Turn-on/off Protection: Fully Short Circuit Protection With Auto Recovery, Thermal Shutdown Components: Few External Components Required Package: SOP-16L/SOP-16(EP) Applications: LCD TVs, Multimedia Speakers, AM/FM Systems, DABs Minimum VDD (V): 2.5 Maximum VDD (V): 5.5 I Q (mA): 10 mA Power/CH (W) @ THD=10%: 5 Power/CH (W) @ THD=1%: 4 Mono or Stereo: Stereo BTL: Yes Class-D or AB: D+AB Efficiency (%): 90 % Volume/Gain Rin adjustable Gain Max: 142kΩ/RI dB SNR: 90 dB PSRR: 70 dB Special Feature: Class D or AB switching
Arduino Wifi Shield
ชื่อสินค้า : Arduino Wifi Shield ESP8266 Expansion Board บอร์ดขยาย ไวไฟ อินเตอร์เน็ต ESP-12E UART รายละเอียดสินค้า ขนาด : 68.1 x 53.1 x 18.2 มม น้ำหนัก : 22.3 กรัม มาตรฐานไร้สาย: รองรับ 802.11 b/g/n (เฉพาะ 2.4G). โหมดการทำงาน: รองรับโหมด STA/AP. แรงดันไฟเข้า: +5VDC จากแหล่งจ่ายภายในหรือ +7V ถึง 9VDC จากแหล่งจ่ายภายนอก. แรงดันไฟฟ้าของโมดูล ESP8266: +3.3VDC. การตั้งค่า Baudrate ตั้งต้น: 9600 kbps baudrate, 8 bit data, 1 stop bit, และไม่มี parity. โมดูลบนบอร์ด: ESP12S WiFi module พร้อม firmware AT ที่ติดตั้งไว้ล่วงหน้า. การสื่อสาร UART: มีตัวเลือก jumper สำหรับ UART ซอฟต์แวร์หรือฮาร์ดแวร์และการสื่อสาร PC-ESP. การออกแบบที่สามารถซ้อนกันได้: ช่วยให้สามารถซ้อนโมดูลเพิ่มเติมได้. ตัวบ่งชี้ LED: มีตัวบ่งชี้ LED บนบอร์ดสี่ตัวสำหรับสถานะของ ESP8266: PWR, L_D13, STA Product Specification Size: 68.1 x 53.1 x 18.2 mm Weight: 22.3 grams Wireless Standard: Supports 802.11 b/g/n (2.4G only). Work Modes: Supports STA/AP modes. Input Voltage: +5VDC from internal source or +7V to 9VDC from an external source. ESP8266 Module Supply Voltage: +3.3VDC. Default Baudrate Settings: 9600 kbps baudrate, 8 bit data, 1 stop bit, and no parity. Onboard Module: ESP12S WiFi module with preloaded AT firmware. UART Communication: Jumper selectors available for software or hardware UART and PC-ESP communication. Stackable Design: Allows for stacking of additional modules. LED Indicators: Onboard four LED indicators for ESP8266 status: PWR, L_D13, STA
LTC3780 Auto Buck-Boost
ชื่อสินค้า : LTC3780 Auto Buck-Boost Step-up Step-down วงจรเพิ่มลดแรงดันอัตโนมัติ โมดูล 5 - 32v เป็น 1 - 30v 10A รายละเอียดสินค้า แรงดันไฟฟ้าเข้า: DC5-32V, แนะนำให้ใช้แรงดันไฟฟ้าเหนือ 10V แรงดันไฟฟ้าออก: DC1V-30V สามารถปรับได้ต่อเนื่อง กระแสไฟฟ้าออก: 10A (สูงสุด), ใช้งานระยะยาวในระดับ 7A กำลังไฟฟ้าออก: ระยะยาว 80W, สูงสุด 130W, หากเกิน 80W กรุณาเพิ่มการระบายความร้อน ระลอกไฟฟ้าออก: 50mV (วัดจาก 12V เป็น 12V) การป้องกันการต่อผิดทิศทางของแรงดันไฟฟ้าเข้า: ไม่มี, หากต้องการ, กรุณาเชื่อมต่อไดโอด Schottky แบบที่ขั้วเข้า การป้องกันการย้อนกลับของแรงดันไฟฟ้าออก: ไม่มี, หากใช้สำหรับการชาร์จแบตเตอรี่หรือโหลดเป็นโหลดที่มีความต้านทานแบบเหนี่ยวนำ, กรุณาเชื่อมต่อไดโอด Schottky แบบ Series ที่ขั้วออก ขนาด: 77.6x46.5x15mm การป้องกันการสั้นวงจร: มี น้ำหนัก: ประมาณ 45 กรัม Product Specification Input Voltage: DC5-32V, recommended voltage above 10V Output Voltage: DC1V-30V continuously adjustable Output Current: 10A (MAX), long-term within 7A Output Power: Long-term 80W, peak 130W, please enhance cooling if over 80W Output Ripple: 50mV (measured from 12V to 12V) Input Reverse Protection: None, if needed, please connect a Schottky diode in series at the input Output Backfeeding Protection: None, if used for battery charging or the load is an inductive load, please connect a Schottky diode in series at the output Dimensions: 77.6x46.5x15mm Short Circuit Protection: Yes Weight: About 45 grams
Pixel Emoji Alarm Clock
MAX7219 LED Matrix
ชื่อสินค้า : MAX7219 LED Dot Matrix แผงเมทริกซ์ แอลอีดี 8x8 หลากหลายสี แดง น้ำเงิน เขียว รายละเอียดสินค้า ความสามารถของโมดูลเดียว: สามารถขับเคลื่อน dot matrix 8x8 common cathode. แรงดันการทำงาน: 5V. ขนาด: ยาว 3.2cm x กว้าง 3.2cm x สูง 1.3cm. รูสำหรับน็อต: สี่รู, ด้วยเส้นผ่าศูนย์กลาง 3mm. อินเตอร์เฟส: มีอินเตอร์เฟสขาเข้าและขาออก, รองรับการเชื่อมต่อโมดูลหลายๆ ตัว. Product Specification Single Module Capability: Can drive an 8x8 dot matrix common cathode. Operating Voltage: 5V. Dimensions: Length 3.2cm x Width 3.2cm x Height 1.3cm. Screw Holes: Four, with a diameter of 3mm. Interfaces: Input and output interfaces, supports cascading multiple modules.
GY-BMP280
ชื่อสินค้า : GY-BMP280 5v 3.3v โมดูลวัดสภาพอากาศ ความดันบรรยากาศ อุณหภูมิ ความแม่นยำสูง รายละเอียดทางเทคนิคของ GY-BMP280 รุ่น: GY-BMP280-3.3 ชิป: BMP280 แหล่งจ่ายไฟ: 3V/3.3V DC กระแสไฟสูงสุด: 1.12mA ช่วงความดันอากาศ: 300-1100hPa (เทียบเท่ากับ +9000…-500 เมตรเหนือระดับน้ำทะเล) ช่วงอุณหภูมิ: -40 … +85 °C อินเตอร์เฟสดิจิตอล: I²C (สูงสุด 3.4 MHz) และ SPI (3 และ 4 สาย, สูงสุด 10 MHz) การบริโภคกระแสของเซ็นเซอร์ BMP280: 2.7µA @ อัตราการสุ่มตัวอย่าง 1 Hz ขนาดโมดูล: 11.5mm*15mm ระยะห่างขา: 2.54mm ความแม่นยำ: ความแม่นยำสูงสุด ±1 hPa สำหรับความดันบารอมิเตอร์, และความแม่นยำ ±1.0°C สำหรับอุณหภูมิ GY-BMP280 Technical Specifications Model: GY-BMP280-3.3 Chip: BMP280 Power Supply: 3V/3.3V DC Peak Current: 1.12mA Air Pressure Range: 300-1100hPa (equivalent to +9000…-500m above sea level) Temperature Range: -40 … +85 °C Digital Interfaces: I²C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz) Current Consumption of Sensor BMP280: 2.7µA @ 1 Hz sampling rate Module Size: 11.5mm*15mm Pin Pitch: 2.54mm Accuracy: ±1 hPa absolute accuracy for barometric pressure, and ±1.0°C accuracy for temperature
RPLIDAR 360 Laser Range
ชื่อสินค้า : RPLIDAR 360 Degree Laser Range Scanner โมดูลเซนเซอร์ วัดระยะ รอบทิศทาง หลายรุ่น C1/A1/A2/A3/S2/M2 รายละเอียดสินค้า : ดูในรูปที่ 2 Product Specification : See in the second picture
SP110E Bluetooth LED Controller
SP110E LED Controller Bluetooth ตัวควบคุมไร้สาย บลูทูธ ใช้ได้กับแถวไฟ LED WS2811 WS2812B WS2815 WS2813 และ อื่นๆ รายละเอียดสินค้า 1. รุ่น: ตัวควบคุมบลูทูธ SP110E Symphony 2. ซอฟต์แวร์แอป: LED Hue 3. แรงดันไฟเข้า: DC5-12V 4. กระแสไฟเวลาทำงาน: 20mA-40mA 5. ขนาดสินค้า: 50*20*10 มม. 6. ขนาดบรรจุภัณฑ์ภายนอก: 80*50*16 มม. 7. น้ำหนักสุทธิ: 20 กรัม 8. น้ำหนักขั้นต้น: 30 กรัม 9. วิธีการเชื่อมต่อ: อินเตอร์เฟซ DC เชื่อมต่อกับแหล่งจ่ายไฟ, อินเตอร์เฟซขั้วต่อ 3 ขาเชื่อมต่อกับแถบไฟ 10. ระยะควบคุม: ประมาณ 30 เมตร 11. การรับรอง: CE, ROHS 12. สามารถควบคุมพิกเซลได้ 1024 พิกเซล Product Specification 1. Model: SP110E Symphony Bluetooth Controller 2. APP software: LED Hue 3. Input voltage: DC5-12V 4. Working current: 20mA-40mA 5. Product size: 50*20*10mm 6. Outer packaging size: 80*50*16mm 7. Net weight: 20 grams 8. Gross weight: 30 grams 9. Connection method: DC interface connects to power supply, 3pin terminal interface connects to light strip 10. Control distance: about 30 meters 11. Certification: CE, ROHS 12. Can control 1024 pixels.
XY-LPWM PWM Generator
ชื่อสินค้า : XY-LPWM PWM Generator โมดูลกำเนิดสัญญาณ ความถี่ Square Wave ปรับความถี่และ Duty cycle ได้ รายละเอียดสินค้า จุดเด่น: หน้าจอ LCD แสดงความถี่และอัตราส่วนการทำงาน สามารถปรับความถี่และอัตราส่วนการทำงานแยกกันได้ ช่วงความถี่กว้าง ความแม่นยำสูง รองรับการสื่อสารแบบอนุกรม รายละเอียดโมดูล: สัญญาณ PWM ที่สามารถปรับความถี่และอัตราส่วนการทำงานแยกกันได้ ช่วงความถี่ด้วยการเปลี่ยนอัตโนมัติ: ไม่มีจุดทศนิยม: 1Hz ถึง 999Hz จุดทศนิยมอยู่ที่ร้อย: 1.00Khz ถึง 9.99Khz จุดทศนิยมอยู่ที่สิบ: 10.0KHz ถึง 99.9KHz จุดทศนิยมอยู่ที่สิบและร้อย: 1KHz ถึง 150KHz ช่วงอัตราส่วนการทำงาน: 0% ถึง 100% การตั้งค่าทั้งหมดจะถูกบันทึกและคงอยู่หลังจากปิดเครื่อง การตั้งค่าพารามิเตอร์: มีปุ่มอิสระ 4 ปุ่มสำหรับการตั้งค่าความถี่และอัตราส่วนการทำงาน รองรับการกดสั้น (เพิ่มหรือลดหนึ่งหน่วย) และการกดยาว (เพิ่มหรือลดอย่างรวดเร็ว) การตั้งค่าจะถูกบันทึกอัตโนมัติและคงอยู่หลังจากปิดเครื่อง พารามิเตอร์โมดูล: แรงดันการทำงาน: 3.3V ถึง 30V ช่วงความถี่: 1Hz ถึง 150KHz ความแม่นยำของความถี่: ความแม่นยำประมาณ 2% ในแต่ละช่วง ความสามารถในการโหลดสัญญาณ: กระแสขาออกประมาณ 5mA ถึง 30mA ขนาดออกพัลส์: ขนาด PWM เท่ากับแรงดันไฟฟ้าที่ให้ไฟ อุณหภูมิการใช้งาน: -20°C ถึง +70°C น้ำหนัก: 14g ขอบเขตการใช้งาน: เครื่องกำเนิดสัญญาณสัญญาณสี่เหลี่ยมสำหรับการพัฒนาทดลอง สร้างสัญญาณสี่เหลี่ยมสำหรับควบคุมไดรเวอร์มอเตอร์ สร้างพัลส์ที่ปรับได้สำหรับใช้กับ MCU สร้างพัลส์ที่ปรับได้เพื่อควบคุมวงจร (การปรับแสง PWM, ควบคุมความเร็ว, ฯลฯ) การควบคุมผ่านทางอนุกรม (การสื่อสารระดับ TTL กับไมโครคอนโทรลเลอร์): มาตรฐานการสื่อสาร: 9600 bps, บิตข้อมูล: 8, บิตหยุด: 1, ความเท่าเทียม: ไม่มี, การควบคุมการไหล: ไม่มี คำสั่งการตั้งค่าความถี่ PWM: F101: ตั้งค่าความถี่เป็น 101 Hz F1.05: ตั้งค่าความถี่เป็น 1.05 KHz F10.5: ตั้งค่าความถี่เป็น 10.5 KHz F1.0.5: ตั้งค่าความถี่เป็น 105 KHz คำสั่งการตั้งค่าอัตราส่วนการทำงาน PWM: DXXX: ตั้งค่าอัตราส่วนการทำงาน PWM เป็น XXX%; เช่น, D050 สำหรับอัตราส่วนการทำงาน 50% คำสั่งอ่านพารามิเตอร์ที่ตั้งไว้: ส่งสตริง “read” การตอบกลับเมื่อตั้งค่าสำเร็จ: DOWN การตอบกลับเมื่อตั้งค่าไม่สำเร็จ: FALL Produce Detail Highlights: LCD display for frequency and duty cycle clarity Frequency and duty cycle are separately adjustable Wide frequency range with high precision Serial communication supported Module Description: PWM output with separately adjustable frequency and duty cycle Frequency ranges with automatic switching: No decimal point: 1Hz to 999Hz Decimal point at hundredths: 1.00Khz to 9.99Khz Decimal point at tenths: 10.0KHz to 99.9KHz Decimal points at tenths and hundredths: 1KHz to 150KHz Duty cycle range: 0% to 100% All settings are saved and retained after power off Parameter Setting: Four independent buttons for setting frequency and duty cycle Supports short press (increase or decrease by one unit) and long press (rapid increase or decrease) Settings are automatically saved and retained after power off Module Parameters: Working Voltage: 3.3V to 30V Frequency Range: 1Hz to 150KHz Frequency Accuracy: Approximately 2% accuracy across each range Signal Load Capacity: Output current approximately 5mA to 30mA Output Amplitude: PWM amplitude equal to supply voltage Operating Temperature: -20°C to +70°C Weight: 14g Application Scope: Square wave signal generator for experimental development Generating square wave signals for controlling motor drivers Generating adjustable pulses for MCU use Generating adjustable pulses for controlling circuits (PWM dimming, speed control, etc.) Serial Control (TTL level communication with microcontroller): Communication Standard: 9600 bps, Data bits: 8, Stop bits: 1, Parity: None, Flow Control: None Setting PWM frequency commands: F101: Set frequency to 101 Hz F1.05: Set frequency to 1.05 KHz F10.5: Set frequency to 10.5 KHz F1.0.5: Set frequency to 105 KHz Setting PWM duty cycle commands: DXXX: Set PWM duty cycle to XXX%; e.g., D050 for 50% duty cycle Reading set parameters command: Send “read” string Successful setting response: DOWN Failed setting response: FALL
Arduino Due
ชื่อสินค้า : Arduino DUE R3 บอร์ดคอนโทร ไมโครคอนโทรลเลอร์ ARM 32-Bit 68 I/O ขาเยอะ พร้อมสาย รายละเอียดสินค้า ไมโครคอนโทรลเลอร์: AT91SAM3X8E แรงดันไฟฟ้าในการทำงาน: 3.3V แรงดันไฟฟ้าที่แนะนำ (แรงดันไฟฟ้าที่เข้า): 7-12V ขีดจำกัดของแรงดันไฟฟ้าที่เข้า: 6-20V ขา Digital I/O: 54 ขา (12 ขาให้สัญญาณ PWM) ขา Analog Input: 12 ขา ขา Analog Outputs: 2 ขา (DAC) กระแสไฟฟ้ารวมสูงสุดที่ไหลออกทางขา I/O: 130 mA กระแสไฟฟ้าสำหรับขา 3.3V: 800 mA กระแสไฟฟ้าสำหรับขา 5V: 800 mA หน่วยความจำ Flash: 512 KB ทั้งหมดสามารถใช้สำหรับโปรแกรมของผู้ใช้ SRAM: 96 KB (แบ่งเป็นสองธนาคาร 64KB และ 32KB) ความเร็วคล็อก: 84 MHz ความยาว: 101.6 มม. ความกว้าง: 53.2 มม. ความสูง: 12.83 มม. Product Specification Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 (DAC) Total DC Output Current on all I/O lines: 130 mA DC Current for 3.3V Pin: 800 mA DC Current for 5V Pin: 800 mA Flash Memory: 512 KB all available for the user applications SRAM: 96 KB (two banks 64KB and 32KB) Clock Speed: 84 MHz Length: 101.6 mm Width: 53.2 mm Height: 12.83 mm
9V Rechargeable Battery
ชื่อสินค้า : 9v Lithium Rechargeable Battery ถ่านชาร์จได้ Micro USB 1000mAh 650mAh คุณภาพสูง แบตเตอรี่ สามารถใช้แทนถ่านแบบเก่าได้เลยไม่ต้องมีอุปกรณ์เพิ่ม Can be used in place of old batteries, no additional equipment required. รายละเอียดสินค้า แรงดันถ่าน : 9v แรงดันในการชาร์จ : 5v/200mA (USB) ขนาด : 47.5x26x16 มม น้ำหนัก : 25 กรัม สามารถชาร์จได้ : 1500 ครั้ง Product Specification Voltage : 9v Charging: 5v/200mA (USB) Size : 47.5x26x16 mm Weight : 25 gram Charging cycle : 1500 times
SZ-BT07CCCV-A 1200w DC Step-up
ชื่อสินค้า : SZ-BT07CCCV-A 1200w DC Boost Step-up 20A โมดูล ปรับแรงดัน เพิ่ม สเตปอัพ มีพัดลมในตัว รายละเอียดสินค้า ชื่อโมดูล: โมดูลกระตุ้นกระแสคงที่ 1200W คุณสมบัติโมดูล: โมดูลกระตุ้นไม่แยก (BOOST) แรงดันไฟฟ้าขาออก: DC10-60V (ป้อนตรง 10-60V ไม่ต้องใช้ jumper cap เพื่อเลือกแรงดัน) กระแสไฟฟ้าขาเข้า: หากเกิน 20A (สูงสุด) 1 กรุณาเพิ่มพัดลม กระแสเริ่มต้นทำงาน: 15mA (เมื่อ 12V เพิ่มขึ้นเป็น 20V, แรงดันขาออกที่สูงขึ้น, กระแสคงที่จะเพิ่มขึ้น) แรงดันไฟฟ้าขาออก: การใช้งานแบตช์ 12V (รายละเอียดไม่ชัดเจนในภาพ) กระแสขาออก: 0.5-18A (+/-0.3A) ช่วงกระแสคงที่: 0.5-18A (+/-0.3A) การป้องกันการเชื่อมต่อย้อนกลับ: ใช่ (MOS ป้องกันย้อนกลับไฟฟ้า 150A) การป้องกันแบตเตอรี่ต่ำ: ใช่ (ปรับได้ 9-50V) อุณหภูมิการทำงาน: -40~+85 องศา (กรุณาเพิ่มการกระจายความร้อนเมื่ออุณหภูมิแวดล้อมสูงเกินไป) ความถี่การทำงาน: 150KHz ประสิทธิภาพการเปลี่ยนแปลง: 92%-97% (ประสิทธิภาพเกี่ยวข้องกับแรงดันไฟฟ้าขาเข้าและขาออก, กระแส, และความแตกต่างของแรงดันไฟฟ้า ความแตกต่างแรงดันไฟฟ้าน้อยหมายถึงประสิทธิภาพสูง) การป้องกันกระแสเกินขาเข้า: ใช่ (หากการป้อนเกิน 2, การป้องกันอัตโนมัติจะเกิดขึ้นและแหล่งจ่ายไฟจะไม่เพิ่มแรงดัน) การป้องกันวงจรสั้น: มี (ฟิวส์ขาเข้า 30A) การป้องกันวงจรสั้นสองชั้น, ใช้ การป้องกันการเชื่อมต่อขั้วไฟฟ้าย้อนกลับ: ใช่ (อย่าเชื่อมต่อขั้วไฟฟ้าขาเข้าย้อนกลับ, มันสามารถเชื่อมต่อย้อนกลับได้นาน) วิธีการติดตั้ง: 4 ชิ้น คอลัมน์ทองแดงขนาด 3มม. การเดินสาย: ขั้วต่อ (กรุณาใช้สายทองแดงบริสุทธิ์สำหรับกระแสสูง) ขนาดโมดูล: ยาว 130มม., กว้าง 52มม., สูง 53มม. น้ำหนักของโมดูล: 300กรัม กำลังไฟขาออก: =แรงดันไฟฟ้าขาเข้า*20A หมายเหตุ: เมื่อแรงดันไฟฟ้าขาเข้าคือ 12V, กำลังไฟคือ 240W, เมื่อแรงดันไฟฟ้าขาเข้าคือ 24V, กำลังไฟคือ 480W, เมื่อแรงดันไฟฟ้าขาเข้าคือ 36V, กำลังไฟคือ 720W. Product Specification Module model: SZ-BT07CCCV-A Module name: 1200W boost constant current module Module properties: Non-isolated boost module (BOOST) The output voltage: DC10-60V (direct input 10-60V without jumper cap to select voltage) Input Current: If 20A (MAX) exceeds 1, please add a fan Quiescent operating current: 15mA (when 12V steps up to 20V, the higher the output voltage, the higher the static current will increase) The output voltage: 12-to-batch application (blurred in image, precise value not visible) Output current: 0.5-18A (+/-0.3A) Constant current range: 0.5-18A (+/-0.3A) Input anti-reverse connection: Yes (150A power MOS anti-reverse) Low battery protection: Yes (9-50V adjustable) Operating temperature: -40~+85 degrees (please strengthen heat dissipation when the ambient temperature is too high) Working frequency: 150KHz Conversion efficiency: 92%-97% (efficiency is related to input and output voltage, current, and voltage difference. Small voltage difference means high efficiency.) Input overcurrent protection: Yes (if the input exceeds 2, automatic protection will occur and the power supply will not boost) Short circuit protection: There is (input 30A fuse) double short circuit protection, use Input reverse polarity protection: Yes (do not connect the input terminals in reverse, it can be reverse-connected for a long time) Installation method: 4 pcs 3mm copper pillars Wiring: Terminals (please use high current pure copper wire) Module size: 130mm long, 52mm wide, 53mm high Module unit weight: 300g Output Power: =Input voltage*20A Note: When the input is 12V, the power is 240W, when the input is 24V, the power is 480W, when the input is 36V, the power is 720W.
COB12010 LED 10W 12V
ชื่อสินค้า : COB12010 LED 10W 12V หลอดไฟ เล็ก บาง แสงจ้า ขนาด 120 x 10 มม สีขาว ขาวอุ่น ขาวเย็น น้ำเงิน แดง เขียว รายละเอียดสินค้า ยี่ห้อ: คูลีออน หมายเลขผลิตภัณฑ์: COB12010 ขนาด COB: 120*10 มม. ขนาดพื้นผิวที่เปล่งแสง: 100*10 มม. กำลังไฟที่วัดได้: 10 วัตต์ แรงดันไฟฟ้าที่ใช้งาน: 12 โวลต์ ประสิทธิภาพแสง: >110 ลูเมน/วัตต์ อายุการใช้งาน: การใช้งานปกติ 30000 ชั่วโมง ตัวเลือกสี: สามารถเลือกสีได้ (สีขาวอุ่นและขาวเย็นธรรมชาติ สีฟ้า สีเขียว สีแดง) R.A.: 70-90% ประเภทฐาน: แผ่นอลูมิเนียม วัสดุสาย: สายทองคำ ยี่ห้อชิป: ซานอัน มุมลำแสง: 120 องศา Product Specification Brand: COOLEON Product Number: COB12010 COB Size: 120*10 mm Luminous Surface Size: 100*10 mm Measured Power: 10W Operating Voltage: 12V Light Effect: >110LM/W Life Expectancy: Normal use 30000H Color Options: Can choose color (Warm and cold natural white blue green red) R.A.: 70-90% Substrate Type: Aluminum plate Wire Material: Gold Line Chip Brand: San'an Beam Angle: 120°
SZ-BT07CCCV-S 1800w DC Step-up
ชื่อสินค้า : SZ-BT07CCCV-S 1800w DC Boost Step-up 30A โมดูล ปรับแรงดัน เพิ่ม สเตปอัพ มีพัดลมในตัว รายละเอียดสินค้า หมายเลขรุ่น: SZ-BT07CCCV-S ชื่อโมดูล: โมดูลเพิ่มแรงดันคงที่ 1500W ประเภทโมดูล: โมดูลเพิ่มแรงดันไม่แยกส่วน (BOOST) แรงดันไฟเข้า: DC10-60V กระแสไฟเข้า: กระแสไฟ 30A สำหรับแรงดันไฟ 10-30V; กระแสไฟ 20A สำหรับแรงดันไฟ 31-60V กระแสไฟงานรอบคอบ: 15mA (ที่ 12V ถึง 20V, จะเพิ่มขึ้นตามแรงดันไฟออก) แรงดันไฟออก: 12-90V ปรับได้ต่อเนื่อง (ค่าเริ่มต้น 19V, สามารถปรับเป็นแรงดันไฟอื่นได้) กระแสไฟออก: สูงสุด 20A (ต้องเพิ่มการระบายความร้อนเมื่อเกิน 1A) ช่วงกระแสคงที่: 0.8-20A (+/- 0.3A) การป้องกันการต่อกลับของกระแสไฟเข้า: มี (150A MOS ป้องกันการต่อกลับ) การป้องกันแบตเตอรี่ต่ำ: มี (8-50V ปรับได้) ประเภทการฟื้นตัวเอง อุณหภูมิการทำงาน: -40~+85°C (เพิ่มการระบายความร้อนหากอุณหภูมิแวดล้อมสูง) ความถี่การทำงาน: 150KHz ประสิทธิภาพการแปลง: 92%-97% (ขึ้นอยู่กับแรงดันไฟเข้า/ออก, กระแสไฟ, และความแตกต่างของแรงดันไฟ) การป้องกันกระแสไฟเข้าเกิน: มี (การป้องกันอัตโนมัติเมื่อกระแสไฟเข้าเกิน 3, ไม่เพิ่มแรงดันไฟ) การป้องกันการสั้นวงจร: มี (ฟิวส์เข้า 30A) การป้องกันการสั้นวงจรสองชั้น การป้องกันการต่อกลับของกระแสไฟเข้า: มี (MOS กำลัง 150A สำหรับการต่อกลับระยะยาว) วิธีการติดตั้ง: คอลัมน์ทองแดง 4 ชิ้น ขนาด 3mm วิธีการเชื่อมต่อ: ทางเข้าสายไฟ (ใช้สายไฟทองแดงกระแสไฟสูง) ขนาดโมดูล: ยาว 130mm, กว้าง 52mm, สูง 84mm (รวมคอลัมน์ทองแดงและพัดลม), สูง 67mm (ไม่รวมคอลัมน์ทองแดงและพัดลม) น้ำหนักโมดูล: 490g กำลังไฟออก: = แรงดันไฟเข้า * 30A, เช่น แรงดันไฟเข้า 12V จะได้กำลังไฟ 360W; แรงดันไฟเข้า 24V จะได้กำลังไฟ 720W Product Specification Model Number: SZ-BT07CCCV-S Module Name: 1500W - 1800W Boost Constant Current Module Module Type: Non-isolated Boost (BOOST) Input Voltage: DC10-60V Input Current: 10-30V input voltage, 30A current; 31-60V input voltage, 2A current Quiescent Current: 15mA (at 12V to 20V, increases with output voltage) Output Voltage: 12-90V continuously adjustable (default 19V, customizable for other voltages) Output Current: 20A MAX (requires enhanced heat dissipation beyond 1A) Constant Current Range: 0.8-20A (+/- 0.3A) Input Anti-reverse Protection: Yes (150A power MOS anti-reverse) Low Battery Protection: Yes (8-50V adjustable) Self-recovery type Operating Temperature: -40~+85°C (enhance heat dissipation if ambient temperature is high) Operating Frequency: 150KHz Conversion Efficiency: 92%-97% (depends on input/output voltage, current, and voltage difference) Input Overcurrent Protection: Yes (auto protection when input exceeds 3, power does not boost) Short Circuit Protection: Yes (input 30A fuse) Dual short circuit protection. Input Reverse Connection Protection: Yes (150A power MOS for long-time reverse connection) Installation Method: 4pcs 3mm copper columns Wiring Method: Terminal blocks (use high current pure copper wire) Module Size: Length 130mm, Width 52mm, Height 84mm (including copper columns and fan), Height 67mm (excluding copper columns and fan) Module Weight: 490g Input Voltage * 30A, e.g., 12V input results in 360W; 24V input results in 720W
LPWM3 3-Way PWM Generator
ชื่อสินค้า : LPWM3 3-Way PWM Generator โมดูล กำเนิดสัญญาณ ความถี่ นาฬิกา 3 ช่องสัญญาณ 150KHz รายละเอียดสินค้า จำนวนขา PWM: 3 ขา, สามารถปรับความถี่ได้ แสดงผล: LCD สำหรับความถี่และอัตราส่วนการทำงาน ช่วงความถี่: 1Hz~150KHz, แบ่งออกเป็นสี่ช่วง: 1Hz~999Hz โดยมีขั้นตอน 1Hz 1.00Khz~9.99Khz โดยมีขั้นตอน 0.01Khz 10.0KHz~99.9KHz โดยมีขั้นตอน 0.1Khz 1KHz~150KHz โดยมีขั้นตอน 1Khz ช่วงอัตราส่วนการทำงาน: 0~100% (100% แสดงเป็น A0%) แรงดันไฟฟ้าทำงาน: 3.3~30V ความแม่นยำของความถี่: ประมาณ 2% ในทุกช่วง ความสามารถในการโหลดสัญญาณ: กระแสขาออกประมาณ 5~30mA แอมพลิจูดของสัญญาณขาออก: เท่ากับแรงดันไฟฟ้าที่ให้ไฟ อุณหภูมิการทำงาน: -20~+70℃ การใช้งาน: เครื่องกำเนิดสัญญาณคลื่นสี่เหลี่ยมสำหรับการพัฒนาทดลอง การผลิตสัญญาณคลื่นสี่เหลี่ยมสำหรับควบคุมไดรเวอร์มอเตอร์ การสร้างพัลซ์ที่สามารถปรับได้สำหรับการใช้ MCU การสร้างพัลซ์ที่สามารถปรับได้เพื่อควบคุมวงจรที่เกี่ยวข้อง (การใช้ PWM ในการปรับแสง ควบคุมความเร็ว ฯลฯ) Product Specification Number of PWM Outputs: 3, with adjustable frequency Display: LCD for frequency and duty cycle Frequency Range: 1Hz~150KHz, divided into four ranges: 1Hz~999Hz with 1Hz step 1.00Khz~9.99Khz with 0.01Khz step 10.0KHz~99.9KHz with 0.1Khz step 1KHz~150KHz with 1Khz step Duty Cycle Range: 0~100% (100% displayed as A0%) Working Voltage: 3.3~30V Frequency Accuracy: Approximately 2% across the range Signal Load Capacity: Output current approximately 5~30mA Output Amplitude: Equal to the supply voltage Operating Temperature: -20~+70℃ Applications: Square wave signal generator for experimental development Generating square wave signals for motor driver control Adjustable pulse generation for MCU use Adjustable pulse for controlling related circuits (PWM dimming, speed control, etc.)